Plastic fiber optic according to the different materials of fiber core is generally divided into PS plastic fiber, PMMA plastic fiber and batch PC plastic fiber. At present, conventional large quantities are mainly used for PS plastic optical fiber and PMMA plastic optical fiber. PMMA plastic optical fiber is widely used in functional lighting and sensing. PMMA plastic fiber loss is 150-300 dB/km according to different fiber diameter. Spectral transmission range is 380nm-780nm. In the museum lighting or commercial display lighting, the designer most need is to damage the exhibits of UV and infrared light and heat effectively isolated, and plastic fiber because of its own characteristics just in line with this requirement. There's kinds of plastic optical fiber in the Fiber Optic Sensor, generally we need to consider the following factors: First, according to the detection distance selection, if the detection distance is far, as far as possible to choose the fiber core by the thicker fiber. If the detection target is small, the optional numerical aperture is smaller or additionally with the condenser lens. Second, according to the size of the space, whether the need for smaller turn to install. The larger the core diameter of the plastic fiber, the greater the corresponding minimum bending radius, and the more light it consumes when it is smaller. So we can choose as much as possible when the choice of fiber monofilament core finer. Currently available on the market the smallest bending radius of the plastic fiber up to R0.5 mm. Third, according to the use of ambient temperature, conventional plastic fiber temperature at 75 degrees, if the use of the occasion temperature exceeds this, the plastic fiber will be deformed and dramatically increase the loss. Currently available on the market at a higher temperature of 85 degrees level 105 degrees and 150 degrees level, it should be noted that with the plastic fiber temperature performance improvement, and will be accompanied by increased wear and tear. Nanjing Hecho Technology Co., Ltd. Supply high quality imported Mitsubishi plastic fiber, Toray plastic optical fiber, Asahi Kasei plastic optical fiber and Self-coated domestic plastic fiber, complete specifications, adequate inventory, short time delivery. And to provide plastic fiber optic cable using the selection of technical support.

Fiber optic lighting is transmission the light through optical fiber from light source to the designated area. Fiber Optic Lighting has the following characteristics: 1. Theoretically, the light can be transmitted to any place, to meet the practical application of the various requirements. 2. Through the filter to obtain a variety of colors of light to meet the different circumstances of the light color requirements. 3. Through the end of the fiber to make lighting from the abstract into a visualization. 4. Optical fiber lighting to achieve the photoelectric separation, improved safety performance, and broaden the application areas. 5. Plastic optical fiber lighting system soft color, no light pollution, soft color pure. 6. Some special occasions lighting, need infrared and ultraviolet light, such as cultural relics. The spectral range of the plastic optical fiber is located in the visible light section, and the light emitted from the fiber is cold light without infrared and ultraviolet light. 7. The use of fiber-side light-emitting system, the configuration of underwater-type terminal for underwater lighting system, and can be output by the audio system audio signal synchronization control light output and light color transformation. Its lighting effect and safety is better than ordinary low-pressure underwater lighting system, photoelectric separation, no leakage risk. Hecho Fiber Optics provide a complete optical fiber transmission solutions, with more than 10 years production experience, can meet customers' various requirements. Our featured products including Fiber Optic Bundles (Fiber Optic Light Guide), Fiber Optic Light Source (Fiber Optic Illuminators), Fiber Optic Sensors, etc. For more information, please visit Hecho Technology website: www.gohecho.com

At present, the microscope lighting method can be divided into two types of transmission and lighting. The illuminated light beam is emitted from the direction of the objective lens to the surface of the object to be observed, emitted or diffracted by the surface of the object, and then returned to the objective lens. Therefore, the ejection lighting is mainly used for observing metals and opaque objects such as ores, insects or circuit boards. For the fine observation of the circuit board PCB, in particular, need to observe the fine lines, requiring the microscope lens is close or close to the observation, the objective lens is basically attached to the circuit board, based on existing LED Light Source or Halogen light source lighting system can not achieve light focus, it is difficult to achieve litter lighting. Hecho provide a complete optical fiber transmission solutions, we have over 10 years experience in production, according to customer requirements for the production of optical fiber products, such as Fiber Optic Bundles (Light Guide), Fiber Optic Light Source, Fiber Optic Sensors, etc. For more information, please visit Hecho Technology website: www.gohecho.com

Optical Fiber Sensor is the optical signal from the light source through the optical fiber into the modulator, so that the parameters measured with the light entering the modulation area after the interaction, resulting in optical properties of light changes (such as light intensity, wavelength, frequency, phase, polarization, etc.), become the modulation of the signal source, and then through the optical fiber into the photodetector, after demodulation, access to the corresponding parameters of the target. Sensors are moving in a sensitive, precise, adaptable, compact and intelligent direction. In this process, fiber optic sensors much favored by the market. Optical fiber has many excellent properties, such as: anti-electromagnetic and atomic radiation interference performance, fine, soft, light weight mechanical properties; insulation, no induction of electrical performance; water, high temperature, corrosion resistance Chemical properties, etc., fiber can be in people can not reach the place (such as high temperature area), or people harmful areas (such as nuclear radiation area), receive and transmit a variety of information. HECHO provide a complete solutions for fiber optic transmission, we are famous a variety of Fiber Optic Sensors Manufacture, use the imported high transmission rate of glass fiber or plastic fiber for production, including M3 / M4 / M6 Sensor Fiber Optic Sensor Thread Connection, Cylindrical connection type sensor fiber, Heat Resistant Fiber Optic Sensors, regional detection sensor fiber, liquid level detection sensor fiber, etc., which can be Replace KEYENCE Optic Sensors, omron, sick and other brand fiber optic sensors. Hecho provide OEM & ODM services, all kinds of non-standard fiber on-demand customized. For more details, pls visit our website: www.gohecho.com

Optical fiber is a glass or plastic made of fiber, which can use the "light of the total reflection" principle as a light transmission tool. The propagation of light in any medium will be lost due to absorption and scattering, but some measures can be taken to reduce the loss of light over long distances. This includes: the use of ultra-pure quartz glass to reduce impurities in the optical fiber; try to improve the internal structure of the glass uniformity; the use of long wavelength of laser conduction, in order to improve the transmission of optical fiber effect. HECHO choose imported high transmission rate of Germany Schott glass fiber and Japan's Mitsubishi, Asahi Kasei, Toray plastic optical fiber materials, to produce various Fiber optic bundles, Optical fiber sensors and other fiber optic products, to provide complete Fiber optic transmission solutions to meet the industry's use of the environment and application. If you have any related project or questions, pls feel free to contact us.

On March 14, 2017 - 16, Nanjing HECHO Technology participated in the 2017 Shanghai PHOTONICS CHINA Exhibition. As the largest laser, optics and optoelectronic industry event in Asia, from the basic research to the industrial application, the Munich Shanghai Optical Fair leads the industry development trend, focusing on laser and optoelectronics, optical and optical manufacturing, laser production and processing technology, imaging, Quality control of the four sections of the full range of product content, is not to be missed the industry exhibition. This exhibition, HECHO technology display traditional advantages of optical fiber bundles, fiber optic sensors, fiber optic light source and machine vision light source, and grand launch of the new high-power LED light source S5000 and endoscope LED light source module, which won the majority of the old and new The customer's affirmation and praise, also made valuable comments and suggestions. Three days of the successful conclusion of the show, sincerely thank you to visit the new and old customers, HECHO technology will provide you with more professional fiber transmission solutions.

Hecho will attending PHOTONICS CHINA 2017 from March 14th to 16th. We will showcase the latest high power LED cold light source, Halogen light source, Fiber optic bundles, Fiber optic sensors, welcome to visit our booth at N2.2186.

In optical fiber lighting, because the optical fiber is only a carrier of light transmission, so the inevitable need to support the choice of Cold Light Source. The so-called cold light source, is issued by the light emitted by the heat generated part of the infrared light filter effectively. We in the market common lighting with cold light source is divided into metal halide lamp cold light source, halogen cold light source and LED cold light source. Metal Halide Lamp Cold light source is characterized by luminous efficiency can reach 80-90 lm / W, color rendering index can reach 90 or more. Spectral range is relatively wide, good quality metal halide bulb life can generally reach about 5,000 hours. Where the need for high-intensity lighting, metal halide lamp cold light source is a common choice, the disadvantage is its high price, start the need for specialized flip-flop, because its brightness is gradually increased after startup, start more slowly. Halogen cold light source is characterized by luminous efficiency is generally 30-50 lumens / watt, color temperature is generally 2700-3200K, color rendering index is generally more than 80. The rated life of the lamp is 50-1000 hours. Generally in the optical fiber cold light source, the halogen bulb matches with the ellipsoidal reflector cup to gather light. The use of power is generally 50-250W, because of its luminous efficiency in general, more than 100 watts of power use, the convergence point of light after the temperature will be very high, so halogen light source in the selection of the need to pay attention to its heat insulation and heat dissipation, If there is no effective treatment, the focus of the high temperature will burn out the end of the fiber. LED cold light source in recent years the fastest-growing products. White LED light source color temperature in the 2700-6500K, color rendering index 70-92, the service life of up to 30,000 hours because of its high luminous efficiency, fast response and long life, the overall power of small energy-saving, so more and more Occasions, the gradual use of LED cold light source. White LED light source is the cold light emission spectrum is not a continuous spectrum. At the same time Fiber Optic LED Light Source LED light-emitting chip angle is relatively large, coupling optical fiber requires secondary optical distribution, secondary optical light distribution efficiency of its overall effective output is very important, so the higher the power is not the higher its illumination value , More importantly, depends on its effective output of the luminous flux parameters. In summary, in the choice of optical fiber lighting supporting the cold light source, if the spectrum has a higher demand, you can choose metal halide lamp cold Fiber Light Source and halogen light source, if the service life and control response speed may be required, can Select LED cold light source. With the continuous development of LED semiconductor technology, more high-power LED light-emitting chip is also constantly introduced, the effective luminous flux output will be higher and higher, coupled with optimized secondary optical design, overall over metal halide lamp cold light source And the effective output of the halogen lamp cold light source is entirely possible. At the same time several cold light source, need to pay attention to its thermal design, whether the effective isolation of the infrared light part of the light.

LED Light Source is more and more common in our daily life, the traditional fluorescent lamp has slowly be replaced, the LED light source some advantages compared with the traditional fluorescent lamp and characteristics? Under the nanjing hecho according to science and technology is to introduce for everybody. Using range: LED use the low voltage power supply, it is a safer than using high voltage power supply power supply, especially suitable for the public. Applicability: small, each unit of LED is 3 to 5 mm square dice, so can be prepared into various shapes of the device, and is suitable for variable environment Reflect fast: its response time of millisecond incandescent lamps,Fiber Optic LED Light response time for nanosecond level 6 High color rendering: LED high color rendering, won't cause harm to people's eyes

LED cold light source has been widely used in the field of medical lighting, products are also emerge in endlessly, that how to choose an appropriate medical cold light source? For the performance of LED itself, Nanjing hon technology suggestion from the following consideration. 1, the detection of life: medical endoscope using normal halogen lamp and xenon lamp is only a short life of hundreds of hours, often need to change the light bulb, and we are LED endoscopic module 60000 hours service life; 2, information of LED cold light source characteristics, design the optical system with high efficiency, endoscopic LED module brightness increased by more than 30%. 3, test its uniformity is good: endoscopic LED module light irradiation area without spots dark space, light even and soft. 4, check the order with a channel, LED drive current 25 a, ensure the LED light bright enough, there are more than 5000 lm luminous flux, fiber optic illumination value in more than 2 million lux (different) fiber have different test result. 5, pay attention to choose the cooling system, using efficient heat conduction medium, to ensure the service life. Normal use conditions of the LED as far as possible to reduce costs, simple way to set a good effect.

Fiber optic lighting is a new way of lighting in recent years. As a result of the optical fiber itself has some unique physical properties, fiber optic lighting are used in interior decoration lighting, effect of local lighting, billboard lighting, direct lighting, indoor and outdoor building outdoor public area underwater lighting and building outline and the facade lighting, and have achieved good lighting effect. What are the typical features of the Fiber Optic Lighting Source? Hecho Summarized the following points. 1. A single light source can have multiple luminescence properties of the same markers; 2. The light source is easy to replace，also easy to repair 3. Light emitting device can be placed in the position of the non-professional personnel to contact，Therefore, to prevent destructive 4. No ultraviolet and infrared light, can reduce damage to certain items such as cultural relics, textiles; 5. Markers in miniaturization, light weight, easy replacement, installation, can be made into a small size；Small objects placed in a glass or other inner glow form special decorative lighting effect 6. No electromagnetic interference, can be used in nuclear magnetic resonance room, radar control room and other special site has electromagnetic shielding 7. No spark, no electric shock risk, can be used in chemical, oil and gas platform, fountain pool, swimming pool, etc have fire and explosive risk or damp and water of a particular place 8. Light color can be changed automatically 9. Reusable, save investment 10. Soft and easy to fold non-friable, easy to be processed into a variety of different patterns.

Hecho focus on optical fiber production and R& D for more than 10 years, with advanced production technology, strong research and development capabilities and production and processing capacity. Over the years, we are at home and abroad to provide OEM, ODM services, has won critical acclaim. In order to improve the quality of our products on the international market requirements, and further expand the export business, our company in December 2016 successfully passed the intellectual property management system certification. Certified range of products:Glass fiber (GOF), Plastic fiber (POF), Fiber optic light source, Fiber products (Fiber optic bundles, Optical fiber sensors, Fiber jumpers, etc.) Nanjing Hecho technology to do the non-communication optical fiber industry's best products as the goal, with strong technical strength, will further enhance customer service and provide more effective product quality protection.